Hi,
I'm yet to overnight stress test these current timings, but have had no errors running Superposition/OCCT simultaneously for 45 minutes, so wondering if there's anything obvious I can plug in before doing so.
tCL consistently resets to 16 despite entering lower values in BIOS
Voltages changed in BIOS were VSOC to 1.2v, DRAM to 1.5v
CPU is "Lapped", using Arctic Liquid Freezer 240
Current Latency ~55.8ns
I will start lowering DRAM Voltage once deemed Stable. Is it best to do this in 25mv steps?
Many thanks for any suggestions.