CPU: 9800x3d
MOBO: Asus TUF B650 GAMING WIFI PLUS
COOLER: Artic V3 240mm AIO
GPU: Gigabyte gaming OC 9070xt
MEMORY: Gskill Neo DDR5 6000 CL26-36-36-36-90 1.45v @ (6430 CL26-16-36-32-126 1.68v)
Hi all, here is my tried and tested results from last 24 hour bench testing, improved timings and fine tuning Vsoc for less overall power consumption. watching Buildzoids videos regarding Tras, Trc, Trrds, Trrdl & Tfaw and how other timings are used. basically Tras doesn't get used by AM5 but being too low can cause performance loss and best to max it out, meaning information can travel via Trp-Trtp-Trc ……… and skip Tras all together, more so being at 126, i used to run Tras between 32-35 and after raising it to 126 i have noticed a more solid reading from 1% lows in Warzone
I don't in anyway wish for anyone to copy these settings or timings as every Ram set is different, plus i've had the pleasure of working with Gskill's Neo DDR5 6000 CL26-36-36-36-90
After 24 hours testing and not completely finished yet as still need to run Prime95 for 4 hours just to solidify CPU's OC but here are the results till now.
Yes!!
9800x3d, DDR5 6430 CL26-16-36-32-126 running @ 2133mhz Fclk, Vsoc shows 1.3 in the posts but over night run of Ycruncher with Vsoc 1.25 passed, 1.4 failed within 45 mins, all ran at stock CPU no PBO or CO as this set up has 30 mhz OC from Bclk raise to 100.4365, NITRO settings are 1-2-1x8x8.
Picture's speak for themselves as the process goes on, time from HWinfo is bottom right of each pic, 1st test completed 9:36am yesterday morning and Ycruncher finished 7:49am next morning. (UK time)
1st round, consists of 3 runs using 3 different configs in Testmem5, just get give me a baseline as these can be harsh but thorough, between them if there's any wrong timings or power issues they'l pick up on it right away. ALL PASSED !!!
2nd round, if 1st round passes and all is good temp wise with no errors, i move on to Karhu with Cache enabled i let run for minimum 12 hours or 40,000%. this is just to give the memory a long deep run to bond with the 9800x3d's infinity fabric which maxed out just over 250MB/s wich is correct for single CCd running 2133mhz Fclk. PASSED !!!
3rd round, minimum 4 hours Ycruncher or Prime95 to test your memory controller for errors or crashes within the software, Ycruncher ran for 5 hours which took the run time to just under 24 hours. quickly ran PYprime before turning on PBO and adding my usual tried and tested OC, nothing drastic +200 with -20 all core CO no scaler (on Auto) to which there is also before and after PBO pictures of PYprime, which was only ran once for each result.
there is also a CinebenchR23 before and after results, and if anyone would like anymore information on the who, why, what, when and how it was all done, please don't be shy !!
Or if you have any recommendations to change anything please let me know ??
4th round is currently ongoing, running prime95 for minimum 4 hours.
PLEASE DON'T COPY THESE TIMINGS OR SETTINGS IF YOUR NOT SURE !!!!