Got 100% stable system with good latency, I think, and fairly easy. Here is my BIOS changes from default to my stable tune preset. And results
– almost all cores -30 CO
– expo0 agressive
– bclk 102 gives goooood latency reduction tanks to rise in fclock and memclk and uclk
———- my thinking———
– bclk 103 is likely to still work fully stable = 6180mts might be pushing it
What bench to run to see gains in terms of fps / 1% lows ?
(I only game on this PC, and stability is more important) 7800x3d, 2x16gb Corsair vengeance M
4 Comments
Your secondaries are not tuned. Secondaries impact performance way more than primaries.
Biggest immediate improvement can be made by bumping tREFI up to 50K if DIMM temperatures are above 50C or 65K if they stay under 50C with full stress test.
Disable PowerDown mode.
tRDRDSCL can be 4 and tWRWRSCL can be 4 for M die at ~6200MT/s.
tRTP can likely be 12 at ~6200MT/s for M die.
tRRDS and tRDDL can be improved
tRCDWR at 16 will always work.
Edit: Increasing BCLK is not the best way to overclock RAM. It can also cause instability on USB devices.
GG.
No. Save to USB. Dont wan tto Break with These , “Pricess going around..
bclk is probably messing with SATA/USB/PCIe more than with RAM.
Just run 6200MT/s with 100MHz bclk.
In Bios , Save to USB…
Me, So many times I Quit Adjusting “