MEM VDD = 1.55V
VDDQ = 1.4V (runs a bit higher under load)
Also passes Y-Cruncher VT3 1 hour
Tighten primaries first I presume, anything else you would recommend tightening?
MEM VDD = 1.55V
VDDQ = 1.4V (runs a bit higher under load)
Also passes Y-Cruncher VT3 1 hour
Tighten primaries first I presume, anything else you would recommend tightening?
4 Comments
You don’t mind it reaching almost 60c? It’s probably gonna error out if you test for long enough and tighten your timings.
I have a 48Gig 6000 cl26 kit. I am familiar with cpu overclocking but never touched RAM. Can you give me a hint what to do with that kit and how?
I would lower the vdimm voltage to 1.4 and lower the tcl to 32 since you have no temp headroom for more voltage to tighten the timings, you may not see any error while testing but you will sure get low performance while gaming as the memory sticks get hot. Besides why the second dimm is hotter than the first one ? Isnt that the one that is closer to the fans or I am mistaken ?
Lower vdd to 1.45v, raise tcl to 30, lower rest of the primaries to 38 and trc to 68. You’re getting worse performance chasing lower CL when you should be focusing elsewhere. Also 1 hour isn’t stable