Is it safe if I game with an overclock of +2000 MHz memory and a curve editor of +254 MHz. I believe I have applied an under volt where you cut off the voltage after 1000 mV. If I leave these settings, will this shorten the life of the GPU? GPU is a 5090. When running a 20 minute steel nomad stress test the temps do not go over 71.8°C. When playing Indiana Jones temps usually stay around 65°C. I also probably only game like 40 min to 1.5 hrs a day.
4 Comments
you should check if the memory is stable https://github.com/GpuZelenograd/memtest_vulkan
Extremely light undervolt/overclock lol
I run games a +430 curve editor, 3000+ memory clock, undervolt 935mV on 5080. Game temps stay between 56-63c You are fine. I bench at +450 at 990 mV…110 power limit, btw.
If it wasn’t safe, it wouldn’t run stable.
If you didn’t flash firmware or use a soldering iron, it’s safe.