AFMF is AMDs framegen tech already, FSR only does upscaling.
What you may be referring to is people with Nvidia cards and an AMD APU using the APU to stack AFMF onto DLSS framegen to achieve more or less the same result.
Outrageous-Log9238
Idk but I can try tonight. I’ll let you know.
Confident-Estate-275
Yo can use optiscaler combined with one or two other libraries and have not only FSR 4 but also multi frame generation. Even in games that not support FSR4.
I tried Smooth motion with frame gen and got 12 fps in Ghost of Tsushima. One at a time works fine.
Rooach2
No. AFMF2 overrides FSR FG
Dayv1d
A lot technically works but either looks shitty or has high input delay…
ShadyMarlin_RT
It does work, but honestly the input lag from this is so bad if you’re not already holding a constant 100+ fps without any kind of frame gen. And obviously there’s no upside to doing this at all if you are already reaching your monitor’s Hz just from using FSR3 or 4 alone.
Brawndo_or_Water
PCMR: FAKE FRAMES NVIDIA!!
Lossless scaling: OMG I CAN HAS 2 GPU’s !!
NotRandomseer
The difference is one of these is acceptable , and the other is dogshit.
I still dont get how fsr is so much worse than dlss , amd has more experience with gpu’s than intel , but still got beat out by xess
arcaias
I’ve used cyberpunk in game frame gen and lossless scaling frame Gen using a second card and it works great.
In game frame Gen gets me from 65-70fps up to 90-110 FPS then LSFG gets it to 120 using adaptive FG and it stays locked at 120… It’s unbelievably smooth in terms of frametimes and pacing… And the input lag isn’t noticable, it’s the same as if I was just playing at 60, (60 FPS would actually be 16.6ms of latency and with this setup I only get 13.5ms of frametime latency) but the motion clarity is far greater.
OutsideMeringue
It works but the end product is terrible.
jermygod
lossless scaling х20 (⌐■_■)
Desperate-Steak-6425
I tried to run DLSS FG + LSFG + AFMF when I was experimenting with a dual GPU setup.
It was the stupidest idea ever, but I don’t regret trying it.
Car_Guy_Prince2251
I don’t know what AFMF MEANS
So I am making it A Fucking Mother Fucker 😅.
Just a joke pls don’t threaten me
CYCLONOUS_69
Add lossless scaling for some spice..
KinkyFraggle
I tried this with Stalker2 when I first got my 9070xt, didn’t work; the game crashed
jcdoe
What ever happened to just rendering frames as fast as possible? And fuck frame gen?
You don’t get input lag that way.
DaSharkCraft
Yes, and while the input lag is bad, I could probably play a slower game as long as I memorized the timings of my attacks. I personally think the artifacting is much worse though. I’d rather use lossless scaling to get the same or better quality and performance.
Guilty_Rooster_6708
MFG will have much better input lag than FSR frame gen + AFMF and also look better than Lossless Scaling. Lossless scaling is so good for portable devices like the Legion Go and Ally though
how about we stop fake frames and constant amount of upscaling in games since 360 era?
Ayden_Linden
FSR is not “frame generation” or “fake frames” its literally just upscaling. People BADLY need to learn the difference between the two
Mandoart-Studios
My 6700XT still rendering 1440P native on high: pathetic
ChrisFhey
I did something similar with FSR frame generation and Lossless Scaling frame generations. It works and gives me a pretty respectable framerate, but the latency penalty is rather high and I wouldn’t say it’s very enjoyable.
Still, it takes some getting used to the latency, but it’s better than the native 30 FPS I got before.
31 Comments
AFMF is AMDs framegen tech already, FSR only does upscaling.
What you may be referring to is people with Nvidia cards and an AMD APU using the APU to stack AFMF onto DLSS framegen to achieve more or less the same result.
Idk but I can try tonight. I’ll let you know.
Yo can use optiscaler combined with one or two other libraries and have not only FSR 4 but also multi frame generation. Even in games that not support FSR4.
https://github.com/cdozdil/OptiScaler/releases
Now add lossless scaling framegen on top.
Holy input lag batman.
There is also smooth motion.
I tried Smooth motion with frame gen and got 12 fps in Ghost of Tsushima. One at a time works fine.
No. AFMF2 overrides FSR FG
A lot technically works but either looks shitty or has high input delay…
It does work, but honestly the input lag from this is so bad if you’re not already holding a constant 100+ fps without any kind of frame gen. And obviously there’s no upside to doing this at all if you are already reaching your monitor’s Hz just from using FSR3 or 4 alone.
PCMR: FAKE FRAMES NVIDIA!!
Lossless scaling: OMG I CAN HAS 2 GPU’s !!
The difference is one of these is acceptable , and the other is dogshit.
I still dont get how fsr is so much worse than dlss , amd has more experience with gpu’s than intel , but still got beat out by xess
I’ve used cyberpunk in game frame gen and lossless scaling frame Gen using a second card and it works great.
In game frame Gen gets me from 65-70fps up to 90-110 FPS then LSFG gets it to 120 using adaptive FG and it stays locked at 120… It’s unbelievably smooth in terms of frametimes and pacing… And the input lag isn’t noticable, it’s the same as if I was just playing at 60, (60 FPS would actually be 16.6ms of latency and with this setup I only get 13.5ms of frametime latency) but the motion clarity is far greater.
It works but the end product is terrible.
lossless scaling х20 (⌐■_■)
I tried to run DLSS FG + LSFG + AFMF when I was experimenting with a dual GPU setup.
It was the stupidest idea ever, but I don’t regret trying it.
I don’t know what AFMF MEANS
So I am making it A Fucking Mother Fucker 😅.
Just a joke pls don’t threaten me
Add lossless scaling for some spice..
I tried this with Stalker2 when I first got my 9070xt, didn’t work; the game crashed
What ever happened to just rendering frames as fast as possible? And fuck frame gen?
You don’t get input lag that way.
Yes, and while the input lag is bad, I could probably play a slower game as long as I memorized the timings of my attacks. I personally think the artifacting is much worse though. I’d rather use lossless scaling to get the same or better quality and performance.
MFG will have much better input lag than FSR frame gen + AFMF and also look better than Lossless Scaling. Lossless scaling is so good for portable devices like the Legion Go and Ally though
https://preview.redd.it/a3vwiij6erze1.jpeg?width=460&format=pjpg&auto=webp&s=9578b9ea7c48a0223aaa3747030a5892eb4a0acc
But the AMD isn’t on fire in this
how about we stop fake frames and constant amount of upscaling in games since 360 era?
FSR is not “frame generation” or “fake frames” its literally just upscaling. People BADLY need to learn the difference between the two
My 6700XT still rendering 1440P native on high: pathetic
I did something similar with FSR frame generation and Lossless Scaling frame generations. It works and gives me a pretty respectable framerate, but the latency penalty is rather high and I wouldn’t say it’s very enjoyable.
Still, it takes some getting used to the latency, but it’s better than the native 30 FPS I got before.
can anyone translate?
Personally I’d not use any of that
Very excited for „As Fuck MotherFucker” 🤞😁🤞