Hi everyone. I built a new PC a month ago.
Today I decided to try tightening the timings without increasing the voltage. I started by running some initial tests with the XMP profile.
And in the test you see in the screenshot, I keep getting an error within 10 minutes. When testing at 4800 MHz, there are no problems.
Here’s everything I’ve done so far: MCLK=UCLK, FCLK 2133, curve -30, game mode enabled, and I set the max CPU temperature to 80°C.
I also ran stress tests in AIDA64, but it doesn't show any errors there.
The memory is Kingston Fury Renegade DDR5-6400 CL32.
I'm a complete beginner at this, so please help me. I just want to get the XMP profile stable without errors. Maybe something in the profile isn’t configured properly—after all, it’s mainly designed for Intel.
5 Comments
Msg me, lets figure it out.
Have you tested if 6400 1:1 is stable?
CPU probably can’t handle 6400 in 1:1. Welcome to most 9000 series
Raise soc voltage to 1.3 and try again
Do 6200 1:1