First of all spec's:
graphics card: rtx 4080
Processor: Ryzen 9 7950x
Ddr5 ram: g.skill tridant z5 7800 mhz 4x16gb
Motherboard: x670e taichi Carrera
I know usually 4 slots ram is maxed around 7000-7200 mhz so I ran mine at 6800, then I can play for like 5-6 days and then my PC just blackouts and my PC won't boot and I need to clear CMOS before I can do anything, also when I tried to enable xmp on 2 sticks it's not working, I also get 2 red voltages values like it's not allowed to use that much voltage I can run it at 1.42 but everything over I can't even boot and I'm out of ideas now I feel like I have tried everything, could be nice to get help before hand thanks
2 Comments
Well I accidentally miss typed i used to run it 6800 but changed it to try to get it More stable so I have been running it at 6400 the past week or so
AMD CPUs are really picky with RAM. And using 4 sticks is even more unstable. Is it AMD EXPO ram or what’s written on the box? It seems like it is intel XMP RAM, with 7800mts I can only find Intel XMP ram.
You are better off using EXPO RAM that is verified to work on AMD platforms.
Not to mention that 7800mts will never ever work on AMD platforms. These are the most probable reasons why you are running into problems.
Most of the times, 6000mts is the sweet spot.
What you can do is try to remove two sticks of ram, reset cmos. Set mhz to 6000 and apply some loose timings. If you are good with 32gb of ram.
Best thing to do would be get rid of the Intel RAM, sell it or give it back, and get a 2 stick 64GB AMD expo RAM kit with 6000mts.