Today I finally reached my goal of joining the top 100 leaderboard for my configuration, without a custom water cooling loop.
This was the test: https://www.3dmark.com/spy/49120013
My settings were:
CPU:
- Power limits: 180W PPT, 140A TDC, 170A EDC
- Voltage: 1.41V static voltage
- Core clock: 4.7ghz all cores
GPU
- Power limits: 400W, 440A TDC and +15% on the amd sw slider
- Voltage: 1.2V static voltage
- Core clock: 2760MHz max, 2660MHz min
- VRAM: 2112MHZ with fast timings
RAM
- 2×16 ddr4, 3866MHZ with timings 16-16-16-16-32-48
I don't recommend to do the same with the gpu, I was prepared to damage my hardware, the temps were really high and I don't think the reference cooler is ok cooling down those poor vrms dealing 450W power.
That said, I noticed this card want a huge ammount of watts, yesterday I thought voltage was the problem, but it wasn't, I only had to raise the power limit.
This sais, I hope this can be useful for you if you want to climb the 3dmark leaderboard as I did.