I recently returned from holiday and noticed last night that my voltage values I input into bios are not being recognized. I have run these settings for over 6 months and it was absolutely fine.
I also have another profile where I run vcore 4.3ghz at 1.29 and dram voltage at 1.46 3400mhz (tighter timings) which I use mainly.
^ If i run this profile now, my cpu vcore is over 1.5v and my dram voltage is over 1.6….
Hwinfo and bios shows the same increased voltage. When i use hw monitor or ryzen master it shows the voltages that I have input.
Why are my voltages showing higher than what I have set?