Search for:
Running Hynix-A die with 1.43V for months, still working without problem (FCLK was 2200, wanted to have less power on CPU-side so lowered to 2000).
PC

Running Hynix-A die with 1.43V for months, still working without problem (FCLK was 2200, wanted to have less power on CPU-side so lowered to 2000).

By


Running Hynix-A die with 1.43V for months, still working without problem (FCLK was 2200, wanted to have less power on CPU-side so lowered to 2000).

2 Comments

  1. tugrul_ddr

    But there is a dedicated RAM-cooler in the case, blowing air directly at two sticks, taking cold air from front in-take. Otherwise trefi timing would be a lot lower.

    Gskill Flare X5 32GB 6000 MT/s CL32 memory kit. Bios default setting for expo was 1.35V. So it’s 70 millivolts higher.

  2. Active-Quarter-4197

    Bruh 1.43v I am running 1.7 lol

Write A Comment