You put the side panel on before testing it, didn’t you?
Top-Conversation2882
It’s more like just kill me now
Atomicjuicer
Is the wall plug switched on?
CapnMalcolmReynolds
Just want to hurl that shit at a wall.
oArchie
Me last month lmao. Turned out the board was bricked from the start. Tried everything. Swapped in a different board…into bios in twenty seconds.
Xenoscope
That’s why you put everything together on the motherboard outside your case before final assembly. Troubleshoot easier.
SuperSpacePancake
Ahhh, where the fun begins……
Moriaedemori
Forgot to plug in the GPU power cable. Every damn time…
veespike
He’s far calmer than I would have been. Or is this the post- rage smoke break?
NewLifeNewDream
I remember putting my cpu in backwards and frying it…
Ugh
Clenmila
Spent a few hours in a panic induced craze over my pc. Then I went to sleep, woke up to an hour of anxiety undoing and rebuilding. Thankfully it worked
ShadowLeagues
Then you realize that you’ve plugged in a PCIe-Cable into one CPU plug. You change it and the PC posts.
slickyeat
lol. This is way too accurate.
JLee1608
I apparently used a wrong sata cable for my psu that caused a tiny short and didn’t let it boot. That cost me an hour of my life…
WhoolyWarlord
I’ve built dozens of PCs, and I always forget to flick the switch on the PSU.
Every… single…. Time.
You’d think I’d learn my lesson, but nope.
Adderall-Buyers-Club
Bro… i once had a friend build one… and he just put the fan on the cpu with no heatsink… it only ran for two minutes before it fried. I went over to his house and im like, wheres the heatsink… it was still in the box.
This was the days of Frys Electronics selling mobo cpu combos on the cheap.
SaltyPhilosopher5454
Then the sub will cry if someone says… *cough cough* >!I use Pre-built pc and it’s fine!<
pintobrains
Pre built for the win
etfvidal
I’m a maniac when a build doesn’t post testing all parts when usually I just forget to update bios on mobo or correctly connect the pwr sw to the right connector!
22 Comments
Return to monkey
https://preview.redd.it/5g8lvjiwmtzc1.jpeg?width=560&format=pjpg&auto=webp&s=626d590bda7d166d68a71c61d52f1c45d981d791
Is the psu switch turn on?
You put the side panel on before testing it, didn’t you?
It’s more like just kill me now
Is the wall plug switched on?
Just want to hurl that shit at a wall.
Me last month lmao. Turned out the board was bricked from the start. Tried everything. Swapped in a different board…into bios in twenty seconds.
That’s why you put everything together on the motherboard outside your case before final assembly. Troubleshoot easier.
Ahhh, where the fun begins……
Forgot to plug in the GPU power cable. Every damn time…
He’s far calmer than I would have been. Or is this the post- rage smoke break?
I remember putting my cpu in backwards and frying it…
Ugh
Spent a few hours in a panic induced craze over my pc. Then I went to sleep, woke up to an hour of anxiety undoing and rebuilding. Thankfully it worked
Then you realize that you’ve plugged in a PCIe-Cable into one CPU plug. You change it and the PC posts.
lol. This is way too accurate.
I apparently used a wrong sata cable for my psu that caused a tiny short and didn’t let it boot. That cost me an hour of my life…
I’ve built dozens of PCs, and I always forget to flick the switch on the PSU.
Every… single…. Time.
You’d think I’d learn my lesson, but nope.
Bro… i once had a friend build one… and he just put the fan on the cpu with no heatsink… it only ran for two minutes before it fried. I went over to his house and im like, wheres the heatsink… it was still in the box.
This was the days of Frys Electronics selling mobo cpu combos on the cheap.
Then the sub will cry if someone says… *cough cough* >!I use Pre-built pc and it’s fine!<
Pre built for the win
I’m a maniac when a build doesn’t post testing all parts when usually I just forget to update bios on mobo or correctly connect the pwr sw to the right connector!