Leave it as is or change anything? Its a 4000mhz CL18 kit, I tried 3866 at 1933 fclk but was getting a single random whea error 19 every now and then. Cant post at 1900fclk. All I did was enable xmp, then manually set 3733 and fclk in both spots in my bio to 1866.
DryClothes2894
You prolly with a little more voltage can run like
1.45v – 16-20-20-40 or around that for primaries
Try to see if your SCL can do like 4 4 or even 3 3
See if your TRRD’s can go tighter
Really try to get tRFC as low as possible, its gonna be tough tho on these high density hynix modules, cause its 16 gig single rank DIMMs
Novel_Bend
You should try to get tFAW tighter, it has a decent impact on performance. It should go down to 40 and if you tighten tRRDL more it can go even lower.
3 Comments
Leave it as is or change anything? Its a 4000mhz CL18 kit, I tried 3866 at 1933 fclk but was getting a single random whea error 19 every now and then. Cant post at 1900fclk. All I did was enable xmp, then manually set 3733 and fclk in both spots in my bio to 1866.
You prolly with a little more voltage can run like
1.45v – 16-20-20-40 or around that for primaries
Try to see if your SCL can do like 4 4 or even 3 3
See if your TRRD’s can go tighter
Really try to get tRFC as low as possible, its gonna be tough tho on these high density hynix modules, cause its 16 gig single rank DIMMs
You should try to get tFAW tighter, it has a decent impact on performance. It should go down to 40 and if you tighten tRRDL more it can go even lower.