**TLDR:** What voltages did you need to set at what speed?
​
I was running 2×24 GB @ 6800 MT with 1.38 v for both (IMC and IVR-VDDQ). I couldn’t stabilize 7200 MT at all and 7000 MT would throw errors after some time, even if i lowered or raised those voltages.
After a new BIOs updated, I wanted to try again; ASUS wrote something about improved RAM stability. I couldn’t make it work, **but found out that 6800 MT works with 1.15 V (IVR VDDQ) and 1.125 V (IMC)**.
Seems very low to me, am I missing something? (Most posts only list the DRAM Voltages)
​
\- 14th gen intel, ASUS STRIX z790-H
\+ I’m still not 100 % sure what of those two voltages actually gets supplied to the IMC (=IVR transmitter voltage in the asus BIOS?). Did I list it correctly? There is mixed information out there – bad ASUS naming. Because VDD2 should be 1.6 V max while VDDQ TX (actual on chip component) should be 1.45 V max, according to [buildzoids guesses](https://www.youtube.com/watch?v=WXhrQfXUYyw&t=887s)