What’s the best way to remove these stickers from my laptop? It’s a metal body. Also, is there any reason I shouldn’t remove them?
What’s the best way to remove these stickers from my laptop? It’s a metal body. Also, is there any reason I shouldn’t remove them?
41 Comments
fingernail for the sticker, isopropyl for the residue if there is any. They’re not paper stickers, they should peel up alright.
Small razor blade or exacto knife
i wouldnt remove them, they make your laptop look good imo
Dab some alcohol
With your fingers.
Angle Grinder
https://preview.redd.it/iszpp0zth3lc1.jpeg?width=800&format=pjpg&auto=webp&s=72a3d8b4ad076d125e60063ed7422ed886195e27
You pull them off and then use the stickers adhesive to remove any residue. It takes some time but the results are acceptable.
Peel the stickers off then use the stickers to remove the adhesive in a stick peel method. Works way better than you would think.
Hair dryer and to clean remaining glue isopropyl
ALT-F4
get those stickers drunk then rip them off while they unconscious
Try to search in Google or ConsoleMasterRace
Isopropyl alcohol and a credit card as a scraper
You can use another piece of tape and tape it on top of the old sticker. Then peel it all off at once.
If you have normal nails (and don’t bite them like me) then you can basically remove them with fingers then add some rubbing alcohol to a cotton pad and rub it to clean the residue. Btw nice cooler pad I have the same one
I usually sweat/rub the off from daily use 😅
ctrl + sticker + del
WD40. Put some and let it soak for some time, the glue will start to weaken
Finger but I wouldn’t remove them since I like how they look
If using isopropyl alcohol, rubbing alcohol, or any type of alcohol, test in a hidden area first… that shit can sometimes damage/discolor some surfaces and finishes.
You can peel off the sticker with fingernails and use a few drops of WD40 to help loosen the sticky adhesive that does not come out. If the sticker rips, WD40 on it for a few minutes will also help it out without damaging the finish.
acid and fire
I always use a heat gun to remove stickers.
Scratch em out with a knife and clean the sticky residue with gasoline.
rub isopropyl alcohol, it will slowly remove the glue and make it easier to remove.
Just gotta peel ’em off and clean the residue with isopropyl alcohol. Method hasn’t failed me yet
With your hands.
Don’t do it man. Not worth it.
But if you must, don’t use a heat gun unless the machine is disassembled. Even then, you risk warping the plastic if you’re not careful. My personal preference is to avoid heat and use a plastic razor scraper to peel off the bulk of the sticker, and then Goo Gone to wipe the rest of the residue clean.
It just rips off by itself when its so hot and getiing rubbed by sweaty wrists. Eventually its gonna come off
Isopropyl + plastic “phone opener” thing, or if you have a sticker removal spray/ liquid, even better
Sell the laptop and buy a pc
I used a hairdryer and then just peeled them off, there are probably better ways tho
https://preview.redd.it/n777zy5p44lc1.jpeg?width=428&format=pjpg&auto=webp&s=7a0fc2f3dac897d987f3909f56128555382a44cf
This will help
Teeth.
A bit bit of isopropyl
Try to put it in rice
It you did not removed them on the arrival of the device…
https://preview.redd.it/qesmt4cb84lc1.jpeg?width=500&format=pjpg&auto=webp&s=fb5f11c97125650e0972dc17a44eb0f073b6fc4d
Just not.
Window cleaner and time
It’s the first thing I do when I unbox. The intel ones are the worst for leaving sticky behind.
Eucalyptus oil takes it right off.
Just grab the hair dryer and set it to hot air, the hair dryer because it won’t leave that annoying glue after you remove the stickers