The size of modern graphics cards is definitely getting out of control.

47 Comments

  1. ChanceAd3606

    They were that long a decade ago. The thickness is what’s getting out of hand. Fucking 6 slot GPUs are being made.

  2. Sea-Concentrate9379

    Thats why I went with a reference 7900xtx things tiny for what it’s capable of even though it gets a little toasty

  3. starktastic4

    Channeling the “Look at me, I am the motherboard now” meme on this one.

    My ASUA TUF RTX 4090 OC is indeed a brick S*it house… make sure you’re careful moving the PC or when re-arranging components. Some of these cards coolers are so heavy they bend the PCB over time. Or flex a ton from minor movements of your rig.

    Get an anti sag bracket or anti sag brace for it just in case. A few bucks can save you a lot.

  4. redgroupclan

    I bought a dual fan GPU and I thought THAT was kind of big. If I got the triple fan it probably would have reached the other side of my case, if it even fit over the other components. How many gens before graphics cards are just a separate component from the PC tower altogether?

  5. HigherFunctioning

    Damn right it is. I didn’t get a 4090 because of the size. I wanted a Micri ITX build. Went with a 3080 EVGA card instead.

  6. It’s all because people are dying for sub 70c load temps when gaming while the cards can run into the 80s and even 90s and be fine.

  7. Inf1n1teSn1peR

    Soon the cpu and ram will be bolted to the gpu and gone will be the days of the mobo

  8. soon video cards will have the motherboards built in.

  9. I don’t mind the large size or heavy weight, **but I do mind** the connecting parts being ridiculously weak strength. The pcie-board on the card breaks very easily, it’s impossible to fix and it’s common problem with 4090s. The pcie-slot on the motherboard isn’t much stronger and don’t even get me started on the power cables. I’ve even seen several cards with twisted metal mount, the part that is screwed on to the back of the case.

  10. Giant_Swigz

    The cards themselves aren’t that large, it’s the coolers that are humongous

  11. wallace321

    Now do CPU Coolers.

    Damn you laws of thermodynamics!

  12. KamenGamerRetro

    size and power consuption, this stuff really need to be look at and some kind of guide lines need to be set in place.

  13. Amilo159

    Most of the time such huge coolers aren’t needed or even benefit that much, especially on a 200-300w GPU.

    My 3060Ti has a massive 3 fan cooler (MSI gaming z trio) that is utterly overkill.

    Companies do this to justify charging the extra money over the MSRP models that feature basically poor quality coolers.

  14. GoldenVendingMachine

    My first desktop pc (90’s ?)was smaller than my current one.

  15. At this point, a riser cable seems like a requirement.

  16. widowhanzo

    It’s even funnier with an ITX board. I had to get a larger case to fit a new GPU, and I got a mATX case but still use a mITX motherboard, and you can barely even see it https://i.imgur.com/IhWpE4t.jpeg

  17. wasptube1

    Damn, I’m glad i am looking to upgrade to the 4070 Super, its quite alot smaller and only 2 slot thick, my case is a full tower but not big enough for that pictured big boi.

    I really need to upgrade though, my old current pc is 8years old and ran great until a few days ago when, 1 of my Ram sticks just burnt out pulling it down from 24gb ram to 16gb ram. I mean 8 years is still pretty good though.

    I wanted to upgrade to the i9 14900K but for affordability i might have to go with the i7 14700K.

  18. Due-Log8609

    im down with it. whatever it takes to make things look hella good.

  19. To be fair the card itself is not bog at all, but they do require more and more powerful cooling.

  20. IneffectiveDamage

    Tbf the temps are way better the more surface area the radiator has. If it fits, it sits

  21. CoconutMochi

    These cooler sizes should really only be a one time thing unless nvidia/amd decide to use samsung’s chips

  22. sparklingvireo

    Cases that can accomodate the “YTX” mobo form factor could become common. There’s less demand for multiple pcie connectors by gamer consumers lately anyways with SLI dying, wifi/bluetooth being built-in and soundcards moving to USB DACs (if not just using the mobo sound device). Or maybe it goes nowhere. IDK. lol

    https://www.tomshardware.com/pc-components/motherboards/maxsun-has-another-wide-ytx-motherboard-for-intel-cpus-terminator-h770ytx-d5-arrives-with-backside-connectors-and-ddr5-8000-support

    Gamers Nexus video on it – https://youtu.be/6axcFSslasM?si=H1OaJlKne3y1_sOg&t=929

  23. Redrum_Bathtub

    Bigger cooler systems is mostly what’s causing the thickness of GPUs.

  24. CiraKazanari

    Why is it out of control? GPUs supposed to be small or something?

  25. CalgonUK

    I’m just waiting for the day when the GPU comes in its own case with its own power supply.

  26. SoDrunkRightNow2

    I mean to be fair, the thing on the left costs twice as much as the thing on the right (even including the ram and chip in most cases)

  27. TurdFerguson614

    *If you choose a 350W TDP card*.
    What else do you want? If you choose a 300W CPU, you better have a 360 radiator of about the same dimensions.

  28. You connect the motherboard to the GPU not the other way around

  29. so when we starting to mount the gpus onto the motherboard tray of cases, and having the motherboards stick out?

  30. theh0tt0pic

    I’m waiting for the day where we build GPUs and it’s a second tower.,

  31. Nah, even the 4090 isn’t so big.. just gotta take all that silly cooling off.

  32. Quantitative_Methods

    They are taking the “Unit” in GPU very seriously.

  33. sh0ugoki

    Maybe we should seriously consider ditching x86 architecture? Heat aside, the power draw of modern PCs has got out of hand.

  34. Meatslinger

    Ah, a fellow TUF user. Yeah, when I got my 4070 Ti out of the box, I was pretty humbled by how huge the thing was. Honestly, I’m wondering if it makes sense for GPU makers to partner with case manufacturers to just create a new type of mounting solution that would permit a “block” GPU instead of hanging the whole thing perpendicularly off the motherboard like they do now. Have something similar in size to a PSU that slides into its own bay and then you attach it via a PCI riser cable or something.

    I did like at least that ASUS included an adjustable support post for the thing though. It’s a hefty bastard.

Write A Comment