I had 2 sets of 2x8gb (32gb total) 3200 Trident Z RGB ram modules in my Ryzen pc. Couple days ago I bought under half price other set for my second Intel pc but I wanted to try it with Ryzen. Pc specification: Ryzen 5800X on Asrock B450M Steel Legend with 2 sets of 2x8gb 4000 Trident Z RGB- specification from Thaiphoon in picture https://ibb.co/CBXgVgV.
Now how can I get 3600MHz or higher on it ( XMP profile dont let pc to boot)? I already set ram to 1,4v, infinity fabric freq and dividers to 1800 (when ram is set to 3600) and the rest on auto. Problem is when I am on Windows and turn on youtube, then I hear breaks in sound. Wanted to try with Dramn calc for Ryzen but I stuck on begining- there is no Hynix d die module in menu. Could You guide me how to safe overclock or set the maximum that this ram can handle on my Asrock mobo?
1 Comment
DJR is probably safe through at least 1.60V since it is binned to XMP that high.
Try SOC 1.15V, VDDP 0.950, VDDG CCD 0.950, VDDG IOD 1.050. Then go from there. You can also try CAD DrvStrs to manually all 24 ohm. For single CCD, the IOD probably makes most difference. Keep the SOC voltage at least 0.050-0.075V higher than the VDDG.
You can also try OCCT GPU Vram + Prime95 Large FFT simultaneously to stress test the fabric (30min – 1hr or so).
You would also want to test the ram with something like Testmem5 (extreme, absolut, or PCBDestroyer config).
[links to testing software are in this guide section](https://github.com/integralfx/MemTestHelper/blob/oc-guide/DDR4%20OC%20Guide.md#memory-testing-software)