Hi, I’ve OC’d my Q8300 to 3.0GHz on a GA-G31M-ES2L mobo following [this](https://www.youtube.com/watch?v=qmgjhtr392M) exact guide.
The system works fine at 3GHz but there’s no ethernet or Wifi detected. Internet works fine when I put it back to 2.5GHz.
I’d appreciate any help. Thanks
2 Comments
just a guess, is the base clock too high, try a lower base clock and a higher multiplier
whats your fsb running at? high fsb speeds can cause problems with 775 boards, since the fsb is for more than just the cpu. Try lowering the fsb a little bit (over 400 it usually gets unstable, depending on the mobo) and check if the problem still persists. also check if you maxed out the multiplier, maybe you can get to 3 ghz with less fsb clock by upping the multi