looks like the actual pcb isn’t huge. time to watercool it.
Additional-Ad-7313
Time for a new psu
Amilo159
Just use a band saw and it’ll fit.
Skerries
is that a case for ants?
Lokival_Thenub
Upgrade till it works
ProfessionalCreme119
OP is “his friend” and he posted this hoping somebody would give him some offhand advice on how to make this work.
shved03
Just use riser
BasmusRoyGerman
The case saved this poor gpu from this “bomb has been planted” kind of psu
Careless-Tradition73
you could get a PCIE riser and mount it going up?
Alternative_Carob682
It’ll fit
Kougeru
I really don’t understand why people buy small cases. It’s a PC. It ain’t moving around often so the weight and size shouldn’t matter. Why not just get a full size and never worry about anything? Better airflow too. Even my friends in Japan got full towers and their entire homes are the size of an America bedroom.
Doudefry
Just buy a new case, or return the gpu for a smaller one
wadap12345
A normal problem, nothing that a metal saw hasnt fixed a hundred times.
cndvsn
Njoy that fire hazard
Brandon-_-Curington
couldn’t be me…
Atreyan
Idk, it looks like it will fit if you can make some clearance. Does the case come apart at all?
Amrootsooklee
What about slicing a part of the gpu heat sink instead of the case??
Good thing the case is the cheapest component to upgrade
RevTurk
I did something similar on my last upgrade. I have a coolermaster Haf 932 and just assumed that I couldn’t buy anything that wouldn’t fit in it. Got caught out with AIO being a 3 fan. It fits, but not perfectly, one of the fans is slightly covered.
yo1peresete
Jokes aside if use pcie extender put GPU vertically (cutting case a bit). It should work
Brigapes
Just squezze it in a bit
Druben-hinterm-Dorfe
The static buildup from socks on carpet can’t be good though, right?
reladent
Did the same when upgrading from a 1660ti to a 6800XT. Got myself a new case and solved the problem
quityourjobb
Ouuf and now he has to wait for the new case
Aimero
I cannot distinguish which one the case is
Djinntan
Ah the curse of a micro ATX
AshutoshPdy
Icy_Boss6053
Case looks similar to one i once bought for 30€ for my backup rig.
Was so small i had to hammer the sidepanel outward so it wouldnt collide with the cpu cooler haha.
TheVoidNull
Did the same with my watercooler… had to get a bigger tower 🤣
kkgmgfn
Oh no! anyways, here we go again
kiefy-
Just make it fit
itsapotatosalad
Time to watercool with a mo-ra
Spookware98SE
Well if that isn’t the funniest shit I’ve seen this morning
38 Comments
looks like the actual pcb isn’t huge. time to watercool it.
Time for a new psu
Just use a band saw and it’ll fit.
is that a case for ants?
Upgrade till it works
OP is “his friend” and he posted this hoping somebody would give him some offhand advice on how to make this work.
Just use riser
The case saved this poor gpu from this “bomb has been planted” kind of psu
you could get a PCIE riser and mount it going up?
It’ll fit
I really don’t understand why people buy small cases. It’s a PC. It ain’t moving around often so the weight and size shouldn’t matter. Why not just get a full size and never worry about anything? Better airflow too. Even my friends in Japan got full towers and their entire homes are the size of an America bedroom.
Just buy a new case, or return the gpu for a smaller one
A normal problem, nothing that a metal saw hasnt fixed a hundred times.
Njoy that fire hazard
couldn’t be me…
Idk, it looks like it will fit if you can make some clearance. Does the case come apart at all?
What about slicing a part of the gpu heat sink instead of the case??
​
https://preview.redd.it/w67k4ydhwmcc1.jpeg?width=700&format=pjpg&auto=webp&s=23268f5927b8c3b0eff24ddc6e43f6afae4728f9
Fits perfect just remove front panel 🤣🤣🤣
Dremel go brrrr, literally.
Nothing the [JONSBO D41 MESH Black ATX case](https://www.amazon.com/dp/B0BQJ2R3RV/ref=emc_bcc_2_i) can’t solve.
Good thing the case is the cheapest component to upgrade
I did something similar on my last upgrade. I have a coolermaster Haf 932 and just assumed that I couldn’t buy anything that wouldn’t fit in it. Got caught out with AIO being a 3 fan. It fits, but not perfectly, one of the fans is slightly covered.
Jokes aside if use pcie extender put GPU vertically (cutting case a bit). It should work
Just squezze it in a bit
The static buildup from socks on carpet can’t be good though, right?
Did the same when upgrading from a 1660ti to a 6800XT. Got myself a new case and solved the problem
Ouuf and now he has to wait for the new case
I cannot distinguish which one the case is
Ah the curse of a micro ATX
Case looks similar to one i once bought for 30€ for my backup rig.
Was so small i had to hammer the sidepanel outward so it wouldnt collide with the cpu cooler haha.
Did the same with my watercooler… had to get a bigger tower 🤣
Oh no! anyways, here we go again
Just make it fit
Time to watercool with a mo-ra
Well if that isn’t the funniest shit I’ve seen this morning
He would need a bigger case unfortunately