Search for:
TimeSpy Low Physics Test Results
PC

TimeSpy Low Physics Test Results

By


Hello! This PC build is only a couple of months old. I’m running a

Asus Z790-E Gaming Wifi MOBO

32 GB of Corsair Vengeance 6000mhz

14900K

Gigabyte Gaming 4070ti

1000W Corsair PS

When I first built the PC, MW3 was pulling 200fps. I didn’t change any settings, but I did put a new desk in and moved the computer. Since that moment, I’ve been lucky to pull 130fps and 80fps under a load.

I’m concerned and not sure where else to look for this.

Thank you!

[http://www.3dmark.com/spy/44631182](http://www.3dmark.com/spy/44631182)

2 Comments

  2. Budget_Ad_4269

    It seems your score is okay.

    4070ti with 12700kf.

    3DMark Score 22574.0

    Graphics Score 24157.0

    Physics Score 16464.0

    Graphics Test 1 158.7 fps

    Graphics Test 2 137.54 fps

    Physics Test 55.31 fps

    ​

    I don’t play with MW3 just with MW2. I have 200+ fps but set everything to low or off except NVIDIA DLAA. Using it because I like smooth lines… 😉

    If graphics maxed out then you probably have that speed.

    Check your Nvidia control panel.

    To let your 3D application determine the optimal settings

    From the NVIDIA Control Panel navigation tree pane, under 3D Settings, select Adjust image settings with preview

    The options on the page enable you to change the image and rendering settings of your 3D applications that utilize Direct3D and OpenGL technology.

    Select the option Let the 3D application decide.

    ​

    GPU OC with MSI afterburner:

    1. Set the power limit to 105 or 110. Which is possible.
    2. Set temp limit to 88
    3. Add core +30%
    4. Set clock mem +1100
    5. Go into the Curve editor. Click on the dot at 900mV. Press and hold Shift button and start the selection form a little bit before that dot and keep pressed the left button until the end (right side). The background will be white. Now select a dot (within the selected area) and press and hold the mouse button and move up with ~200. All entries within the selected area will move up.
    6. Before closing the curve editor Click Apply on the main screen!!! May you have to move the curve editor a 1. little bit .
    7. If you notice any problem during gaming then reduce on the speed.

    ​

    Hopefully it will helpful.

Write A Comment