i don’t see the problem.. if you use super glue, it’ll be harder to get it out come upgrade time
C-D-W
It ain’t stupid if it works.
Eziolambo
Instead of thermal paste, you must have used thermal glue.
Ballerfreund
Direct DIE without any mounting frame and now cracked chips?
Has to be a 7800x3D/7800x or lower, it has only one core chiplet.
FIWDIM
This must be fake, no way someone this dumb would know how to record a video.
Samz_175
Am I looking at a sellotaped CPU missing it’s top?
ShittyExchangeAdmin
Looks good to me, chief
PCGMR2023
Clear tape? Why?
crasagam
“I built it myself”. Yeah, sure did. 👍
cockeyesmcgee
My right honourable friend here was playing 4d chess. You see if you put thermal paste on a processer it sends the heat across more efficiently, right? So it might work the other way and speed up the processor!
lafwan
INFP-Dreamer
Y’all really be dumber than a sack of potatoes.
Y’all must eat Elmers glue.
Y’all really must bathe in bleach.
Y’all must nail board on your feet for shoes.
Y’all really need to be locked up.
MyrtleTurtle4u
Was supposed to use duct tape.
BigBoss738
just press ctrl+z
Middletoon
I think the problem is that you are supposed to keep the cooler screwed on forever so nobody has to see this again
thenightday3
Maximum pain for his wallet
NoStructure5034
Redneck delidding be like:
Exostenza
Obviously, someone destroyed their CPU delidding it and thought they’d make a cringe video for tons of karma. I highly doubt anyone is stupid enough to actually do that.
faverodefavero
Where is the mounting frame? Some many cheap and good options on the market these days…
Kristofernvz
Howww ? Lol
Doc-85
What the actual hell?
PhatManSNICK
It’s missing Sys32
NippleNinja86
Are people using superglue as thermal paste and ceramic gloves to remove glass covers?
I had an AM4 chip pull completely out of the socket when removing a cooler a few months ago. The thermal paste had become quite dry and was acting as a glue. I was extremely lucky that not a single pin was bent. Now I always make sure to twist the cooler back and forth to loosen it up before pulling.
CajunShock
FLEX SEAL new FLEX CPU TAPE get yours today!
Thamos_P84
Also helps if you warm up your processor before pulling ANY cooling unit.
shalol
I just installed the same cooler too… Does this say something about the kind of people purchasing it? Is it like BMW drivers?
Lucacg00
I thought this was a S462/A CPU for a second 🤦♂️
But yeah this sucks.
BackSuspicious2768
Whoever did this should go to jail
Alexandratta
Delidded the CPU…. then removed the retention bracket as if it were a poorly designed Intel bracket that doesn’t apply the pressure evenly to the chip.
Yesh. it’s like they read “How to get better thermals on CPU” and applied all the wrong Intel Chip tips to an AMD CPU.
33 Comments
i don’t see the problem.. if you use super glue, it’ll be harder to get it out come upgrade time
It ain’t stupid if it works.
Instead of thermal paste, you must have used thermal glue.
Direct DIE without any mounting frame and now cracked chips?
Has to be a 7800x3D/7800x or lower, it has only one core chiplet.
This must be fake, no way someone this dumb would know how to record a video.
Am I looking at a sellotaped CPU missing it’s top?
Looks good to me, chief
Clear tape? Why?
“I built it myself”. Yeah, sure did. 👍
My right honourable friend here was playing 4d chess. You see if you put thermal paste on a processer it sends the heat across more efficiently, right? So it might work the other way and speed up the processor!
Y’all really be dumber than a sack of potatoes.
Y’all must eat Elmers glue.
Y’all really must bathe in bleach.
Y’all must nail board on your feet for shoes.
Y’all really need to be locked up.
Was supposed to use duct tape.
just press ctrl+z
I think the problem is that you are supposed to keep the cooler screwed on forever so nobody has to see this again
Maximum pain for his wallet
Redneck delidding be like:
Obviously, someone destroyed their CPU delidding it and thought they’d make a cringe video for tons of karma. I highly doubt anyone is stupid enough to actually do that.
Where is the mounting frame? Some many cheap and good options on the market these days…
Howww ? Lol
What the actual hell?
It’s missing Sys32
Are people using superglue as thermal paste and ceramic gloves to remove glass covers?
https://preview.redd.it/g9xv5wlhxo7c1.png?width=1080&format=pjpg&auto=webp&s=dc80e92343bd941850f18efc5a9399af7dbaa5e1
I had an AM4 chip pull completely out of the socket when removing a cooler a few months ago. The thermal paste had become quite dry and was acting as a glue. I was extremely lucky that not a single pin was bent. Now I always make sure to twist the cooler back and forth to loosen it up before pulling.
FLEX SEAL new FLEX CPU TAPE get yours today!
Also helps if you warm up your processor before pulling ANY cooling unit.
I just installed the same cooler too… Does this say something about the kind of people purchasing it? Is it like BMW drivers?
I thought this was a S462/A CPU for a second 🤦♂️
But yeah this sucks.
Whoever did this should go to jail
Delidded the CPU…. then removed the retention bracket as if it were a poorly designed Intel bracket that doesn’t apply the pressure evenly to the chip.
Yesh. it’s like they read “How to get better thermals on CPU” and applied all the wrong Intel Chip tips to an AMD CPU.
🤮
Hell yeah.