AIDA64 hates me for some reason, I should be sub 50ns latency with these pyprime numbers. I've tried safemode and normal. Shit actually hates me.
So I've been going at this tune, these are the most lowest and stable numbers that I found with these voltages. Literally the absolute sweet spot for 6000 on this kit. May try for cl24, but with ram prices right now, I dont want to risk voltage degradation.
GDM disabled is a no go with current settings.
MCR and power down disabled with tx/rx burst set to 8x 1/2/0 as it should be
Got a thermal right dedicated ram fan and a really good tower pushin cool air, so temps hit 42.8 tops. Picture is in my profile and banner of my cooling setup.
Im happy with this, but if anyone has any more advice on improving this let me know, and any advice as to why aida64 is being the way it is.
Also u/wildtabz thank you for all your help.
6200mts is the next project starting fresh now that I got this 6000mts profile down. I'll slap some extreme testmem5 at it tonight.
Edit 1:
9850X3D
MSI MAG X870E Tomahawk
RM1000X Corsair PSU
64GB dual rank kit Corsair Vengeance CMH64GX5M2B6000Z30
MSI Shadow 3X OC 5070TI
360mm Arctic Freezer 3 PRO
Thermalright MC-2 ARGB RAM Cooler
Custom 120mm arm mounted fan
NZXT H9 FLOW RGB+
Edit 2: BTW, trfc will not go below 386, anything lower will error on testing, fail POST or crash.