Not sure if my 2x16gb 6000mhz cl30 kit likes 65,535 TREFI, it kept throwing test 1 errors in TM5 absolut/extreme but sometimes it would pass TM5 without error, so I'm not sure if TM5 is the issue.. my ram temps peak 40-43c(idles 28c). I'll include screencap where i had max TREFI pass TM5 anta extreme, but maybe with my other tightened times it causes it to be unstable? I also had 1.4v set for VDD/VDDQ/VDDIO that test whereas now I'm just running stock voltages.
All voltages are currently set to stock, minus VDDP being set to 1.10v, not sure if this is needed but it maybe helped me pass these stability tests? I haven't tried setting it back to stock yet which lands around 0.95v.
I tried setting stock nitro from 2/3/1 –> 1/3/1 but it caused errors in both OCCT and TM5, however "Latency killer" was enabled in my bios during that test, whereas now with stock 2/3/1 and Latency killer disabled my tests are now passing.. not sure if 1/3/1 was the issue or Latency killer
Also never tried lowering vsoc, or upping FCLK from stock 2000 and upping 6000mhz–>6200mhz, seems like that might be tough to pass stability tests when it took me so long to get where I'm at now.