Hey Guys,
I'm really struggling here. I have an odd mobo – the b850m tuf, which has offset ramslots (I have no idea how this could potentially impact ram/iod overclocking headroom) I think the traces are longer since the slots are lower than usual?
Anyways, here is my EXPO II profile – I can obtain fclk 2133 cl30 6400. I can obtain 2067 fclk and cl30 6200. However, nothing very stable. I have to raise vsoc to 1.26 for 6400 but 1.25 is the auto vsoc and 6200 boots with it.
I tried raising vdd vddq to 1.44 and still unstable. If I push trefi at all beyond auto which is like 11k I get problems, even without anything else tuned except the default EXPO II.
Can anyone suggest a proper path for me to follow to push this configuration? It is a dual rank 64gb (2×32) CL 30 6000 Hynix A die kit. I have a 9950x which is supposed to have a great IMC. However, I cant get anything below 75ns on aida to be stable. With the cl30 6400 setup I was at like 63ns, and I really felt the difference when playing games and general desktop use. Its also odd that my TRDWR is auto'd to 21 on one stick, and 22 on the other, right?
TREFI I have been reading is the easiest/most impact in my situation, but I know I can reach these higher clocks – i'm just not sure exactly what voltages to set and where. I do have a fan over my sticks now, they idle around 28-32c and max out at 49-52 when gaming/TM5/longLLM prompts for many hours, with a delta of +/- 3 degrees when I push any configuration of settings.