I've got an Aorus Master 5080; without an overclock, but with 125% PL and +100% core voltage, the card can go to 1065mv.
Tried undervolting but thought I'd go completely ham, and raise the curve (850mv +120, then +230 until 1060, and flattened after that); memory is +3000.
When playing Wukong, it'll be sitting around 3142-3165, at 1045-1050mv.
For temps, the highest it'll go is 71 (during some cinematics), but it's typically around 65-67. I should mention it's summer here in Australia, and even with the A/C and fans on full blast, our place is an oven, so might be why temps are so high. 71 is still ok, right – like it's not in the range that will damage the card?
Apart from that, is this any good? I've set a pretty aggressive fan curve (30% until 55, then it's 60% until 65, then it's 80% until 70, which is 100% – hysteresis is 5). I just want to squeeze as much as I can out of it for 4k. Reason I've pulled the curve around 850mv is so the card can idle as it would in stock, but I'm not sure if that's even correct. Would appreciate any feedback š