So I have the Corsair Vengeance 32gb cl30 6000 kit (Sk hynix M-die)
9600x that I have pbo +200
Allcore curve optimizer -40 (yes ,very stable, passes 7hours occt ram test, cpu intensive games,no idle crashes etc)
Ppt capped at 120w
TDC 110 EDC 150
Temps are excellent, draws 85-98w In cyberpunk at 1440p ,not fully used ofc but Occt temps are 61-63 120watts boosting 5515-5545 allcore
Loaded expo timings, and set these timings after a few days of tinkering
Few things especially,Soc voltage is set by expo….it's the Soc voltage….idle is 1.237v with 17.4 watts draw….load was a bit higher…Too high??
And VDD voltage 1.4….they ARE rated at 1.4 v and rgb….anyway as I'm not so well adversed in ram overclocking , especially tertiary timings /voltages I just wanted to ask for some advice if it's worth changing anything?
Now it boots fine,games /stress test work no problem