Search for:
Measured the pins connected to 5090 on Seasonic/Noctua 3.1 with clamp meter - results?
PC

Measured the pins connected to 5090 on Seasonic/Noctua 3.1 with clamp meter – results?

By


Hello,

While running furmark, GPU at stock

I measured each pin with a UNI-T UT210E on DC mode to my PNY 5090 from the Noctua 3.1 1600W Seasonic PSU.

What I found is the row of 6 pins under the sense pins all meaure around -8AMP, while the bottom row all measure just under -3AMP

I cant find much information about per row of these cables, wether they work as pairs, or if each should be the same load, if the top row should be different to the bottom row

Can anyone help explain these results? Thanks for any advice, tried reseating the cable, but results stay consistent.