Last week I passed 4 hours of y-cruncher test without problem. But soon after, when I tried the 2.5 billion digits benchmark, it crashed. Later I found out the issue was Curve Optimizer from Ryzen Master — not good idea for stability in my case. So I stopped using it and instead tried manual offset. Finally got -38 to be stable. Now, even when I run 2.5B benchmark at Realtime priority for many times straight in last week for 2 to 4 hours daily of use, no crash, no error so far. Very happy with this setting.
it did pass 5 cycle of memtest5 but i didn't recorded it. is this enough for CPU & Ram OC stability
- Information
- Motherboard / MAG X870 TOMAHAWK WIFI (MS-7E51)
- BIOS Ver. / E7E51AMSI.1A69
- BIOS Build Date / Sep 19, 2025
- CPU / AMD Ryzen 7 7700X 8-Core Processor
- Graphics Card / NVIDIA GeForce RTX 5070 Ti
- Memory / Kingston FURY Renegade 32GB (2x16GB) 6400MT/s DDR5 CL32 A-die Kit
- Cooling / Custom water cooling
- Profile1: DDR5 6400MT/s 32-39-39-80 1.400V
- DRAM Speed / 6000MT/s
- FCLK Frequency / 2200MHz. UCLK DIV1 MODE /UCLK=MEMCLK
- Memory Context Restore / Disabled
- CPU Core Voltage / CPU Offset Voltage Mode / Negative / -0.0250 V
- CPU NB/SoC Voltage / 1.200 V
- DRAM High Voltage Mode / Enabled
- DRAM Voltage / 1.500V
- DRAM VDDQ Voltage / 1.390V
- CPU VDDIO Voltage / 1.390 V
- DRAM VPP Voltage / 1.850V
- CPU Ratio / Auto
- X3D Gaming Mode / Disabled
- Overclocking\DigitALL Power
- CPU Loadline Calibration Control / Mode 2
- CPU Over Voltage Protection / 350 mV
- CPU Over Current Protection / Enhanced
- CPU Switching Frequency / 800 KHz
- CPU VRM Over Temperature Protection / 95C
- Config TDP 170W(230W/160A/225A)
- Precision Boost Overdrive / Advanced
- PBO Limits Motherboard
- Precision Boost Overdrive Scalar Ctrl / Auto
- CPU Boost Clock Override / Disabled
- Platform Thermal Throttle Limit / 85
- Curve Optimizer / All Cores. Sign / Negative. Magnitude / -38