First, I apologize for missing the timings—I couldn't figure out how to get any version of ZenTimings to work on my PC.
I'm trying to overclock the kit as high as possible while maintaining a 1:1 ratio. At first, I couldn't get the system to work properly, and after extensive testing and playing with power delivery, I discovered that the Curve Optimizer was causing errors, especially during y-cruncher and LinpackXtreme_x64 tests.
Currently, 6200 MT/s is stable at 1.250V SoC(could go lower), and 6400 MT/s posts at 1.225V SoC. However, I don't have an EXPO profile, as the kit has only been tested on Intel systems. I need to manually dial in the settings and test to see if it's possible to achieve stable operation at 1:1 mode with a 2200 FCLK.
DDV : 1.5v
VSoC : 1.250v
tRfEi : Max
geardown = disable