Recently noticed a lot of issues during heavy compilation tasks due to ram errors.
Updated the bios, reset the settings back to default and started from scratch. I'm still looking for the right settings, and honestly still got a lot to learn through reading posts in this community.
From what I understand 4x32GB on this platform is asking for troubles, and it appears that Corsair might have been a bad choose… But I thought I had finally found stable settings using OCCT to validate each change. Unfortunately TM5 (extreme Anta) surfaced errors after an hour.
So now back to default and starting from scratch.
But do you see anything seriously wrong with the current settings?
Here are the different settings I've ran so far:
– 2133 MHz: Stable.
– 2400 MHz (Auto timings, 1.25V DRAM): Failed.
– 2400 MHz (1.35V DRAM): Stable.
– 2666 MHz (1.35V DRAM): Stable.
– 2733 MHz (1.35V DRAM): Failed.
– 2733 MHz (1.37V DRAM): Failed.
– 2733 MHz (1.37V DRAM, 1.2V SOC, 1V CCD, IOD, 0.95V VDDP): Stable.
– 2800 MHz (1.37V DRAM, 1.2V SOC, 1V CCD, IOD, 0.95V VDDP): Failed.
– 2800 MHz (1.38V DRAM, 1.2V SOC, 1V CCD, IOD, 0.95V VDDP): Stable.
– 2866 MHz (1.38V DRAM, 1.2V SOC, 1V CCD, IOD, 0.95V VDDP): Failed.
– 2866 MHz (1.39V DRAM, 1.2V SOC, 1V CCD, IOD, 0.95V VDDP): Stable.
– 2933 MHz (1.39V DRAM, 1.2V SOC, 1V CCD, IOD, 0.95V VDDP): Failed.
– 2933 MHz (1.4V DRAM, 1.2V SOC, 1V CCD, IOD, 0.95V VDDP): Failed.
– 2933 MHz (1.4V DRAM, 1.2V SOC, 1V CCD, IOD, 0.95V VDDP, Cmd2T 2T, Timing 20-22-22-22-48): Failed.