Hey guys, so I watched this possible infamous vid for undervolting ([https://youtu.be/FaOYYHNGlLs](https://youtu.be/FaOYYHNGlLs)) and I have a couple questions.
So I did my settings pretty close to what he did in the vid with a few variations on my 7600x.
So the PPT is 85000mW
TDB is 90000 and EDC is 160000 in bios.
The temp limit is also set to 85 and my CO is -15 because I wanted to be safe.
So the main question is, is it okay that my Core VIDS in HWiNFO64 is still maxing at 1.355v after a cinebench test (10 mins and I’m averaging 1.29 on BG3 right now)? Because in the video right at the end when he inputs the PPT, TDB and EDC values, his HWiNFO tab shows 1.06-1 during a cinebench runthrough when he had a -30 CO. I’m worried I did something wrong or the -30 is really just that good.
What would be the setting that brings the voltage down a little more or is 1.2-1.35 perfectly fine?
I’m decent at deducting hardware stuff and building PCs but the more nitty gritty stuff like this is a bit much. My temps are great now though. Average of 93c Cinebench down to a max of 76.9c but just worried about the voltage.