Managed to stabilize 6000 CL26 with super low tRFC! I was previously stuck on CL28.
Pretty sure this kit is M-die since Normal mode bottoms out around 156–160 ns. Using Mixed Mode, I was able to hit:
- tRFC2: 288 (96 ns)
- tRFCsb: 192 (64 ns)
- tRFC: 96 ns
Latency Killer disable
Latency Killer enabled: 59.1 ns (AIDA64)
*Important: Make sure your Power Plan is set to Balanced or your latency will be higher.*
Let me know if there's anything obvious left to tune or if I should just stop stress testing and go play.