I was given a defective AM5 board with bent pins by a colleague which I've since sorted. So picked up a decent deal for a 7800X3D and RM850 PSU.
I thought I would try my hand with some £100 Jedec spec RAM (5200 C46 I believe) and see how well they go. I know it's single rank and only 2x8gb but I was dreading the RAM purchase the most.
I've ran OCCT for a few hours, Ycruncher for a few hours, TM5 for a few hours, Karhu for the attached.
One think I've noticed is that the bios ram voltage doesn't match what zentimings and HWinfo states. I've had to put 1.42-1.43v to get it to 1.4v
Same with SOC, in bios it's set to 1.25v, zen timings shows 1.255v, I'll likely start lowered SOC soon.
Any further testing required or would you be happy with that?
Any further adjustments I should look at?