So, a month ago I was testing CL-28 6600 at 1.25 VSOC and .950mv VDDG IOD-CCD and got 35,000% coverage on Karhu and I took a look back at those timings and I was surprised that 2200 FCLK worked with only .950mv. Previously I tested CL-32 8000 with 1.15 VSOC, VDDG CCD at .900mv and IOD with 1.00V. At this point I was thinking about how low this could go and loaded these timings back in, but at only 1.00 VSOC and .950mv VDDG for CCD-IOD. I ran Furmark and Y-cruncher VT3 simultaneously for an hour to add as much stress to the SOC as I can to see if VT3 will error out and followed up with 100 runs of Linpack Xtreme. You'll see the GFLOPS reach 501 and creeped up to 502, but this is because the room temperature got lower at the end of the test. (It was almost 6 AM at this point and I was tired). I had PBO set to -30 All Core, because that's what I was using when I tested this previously. This CPU is getting weirder and weirder as I go. Now I have to test how low I can get the VSOC to go at 6400 for 1:1 mode. GDM is Disabled and PHYRDL's are matching at 37/37 in this test.